Why do we need to pay attention to precision when processing aluminum plates?

People in the industry know that the aluminum veneer of the entire aluminum plate project is not produced in one go according to the drawings and handed over directly to the construction party. Instead, after the production of batches of goods is completed, the construction workers will install them completely before the next batch of production and processing. This requires that the product error of the aluminum plate processing manufacturer should not be too large. A small error at the beginning will make the subsequent aluminum veneer processing face data difficulties, and the product is prone to installation problems. As the saying goes, "a small error leads to a thousand miles of error."

Aluminum plate processing

In this regard, the entire aluminum plate processing industry actually has relevant national recommended standards, in which the corresponding parameters are very carefully and strictly specified. Usually the size and specifications of aluminum veneers are composed of thickness, length, width, folding height, diagonal difference, etc. Length and width determine the basic shape of the entire aluminum veneer, while thickness can affect the performance of the entire aluminum plate. Regardless of the type of aluminum veneer, the thickness error range is within +0.1mm. When the length and width of the aluminum veneer are less than or equal to 2000mm, the allowable error in length and width is 1mm. When the length and width are greater than 2000mm, the error of length and width cannot exceed 1.5mm.

Aluminum plate wholesale

The error range of the folding height has nothing to do with the size of the aluminum veneer surface, and can never exceed 0.5mm. The error range allowed by the diagonal difference is that when the length of the aluminum plate is less than or equal to 2000mm, the allowable error value is 2mm; if the length is greater than 2000mm, the error value cannot exceed 3mm.

Aluminum plate

The sheet metal processing of aluminum plates is carried out on the production line by skilled workers on the machine. Due to various reasons, the processed aluminum veneer may have certain errors, but this error must be controlled within a certain range, otherwise it will be an unqualified product. These errors must be reduced as much as possible, and it is better to avoid them completely! Whether it is sheet metal processing or spraying process, attention must be paid to accuracy.